The bulb can work with RGBW remote control, or by iOS or Android App via WiFi controller. Please read the instruction manual carefully before using. Quick and easy installation of the smart LED Bulb is the same as any other common light bulb.
The bulb must be screwed into the light socket and switched on at the wall for 2.4Ghz wireless operation, allowing the remote control/App to turn the LED bulb on/off, dim/brighten and color change.
Secure comminication is done by syncing the remote/App and bulb once.
Frequency: 50-60 Hz
Luminous Flux: 200LM-220LM
Lamp base: GU10
Color : RGB + Pure white
Lifespan: 50000 hours
1PC * 2.4G 4W RGBW Pure white LED Lamp
: Press any zone button of the 4 zones controller immediately once you switch on the light bulb.
The link is done once the light blinks 3 times.
Long press the button of the linked zone immediately once your switch on the light bulb.
The unlink is done once the light blinks 9 times.
1. Link the light bulb with the remote control or the smart phone App before use.
2. Make sure the voltage is between AC86-265V.
3. Avoid using under high temperature o moisture.
4. Make sure the power is off before installation.