1* Receiver (with cover)
2* Remote Control (with battery, If you need extra remote control, please tell us. )
Channel: 4 CH
Coding Type: learning code
Maximum Working Current: 10A
Working Range: 50m (theoretically / in free field)
Output Mode: With voltage output
Step-down approach: resistance-capacitance(RC)
About Working way/ output Way:
It is adjusted by the Jumper on the Receiver Board
Jumper non : Momentary/ Jog--Press and hold -> On; Release -> Off.
Jumper on 1&2 :Toggle/ Self-lock--Press -> On; Press again -> Off
Jumper on 2&3 : Latched/ Interlock--Press -> On; Press other button -> Off.
About Learning and clearing Method:
Input 220V for the receiver .LED indicator ON .Press the learning button, The indicator OFF, then please press any buttons of the remote control , The indicator will flash 3 times,It means successfully studied.
Hold press learning button about 8 seconds,,indicator from OFF to ON,then press remote ,receiver did not work ,it means clearning code successful.
Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehicle, ship, offshore operation, aerial vehicle, field call, etc. It can remote control equipments on land, water and air, such as remote control lights, sirens, locks, motors, fans, winches, blinds, linear actuators, doors, windows, electric solenoid valves, security alarm, business signs and various devices.
Wireless control, easy to install.
Wireless RF signal can pass through walls, floors, doors or windows. You can use two or more units in the same place.
You can turn on/ off the receiver with transmitter (remote control) from any place within a reliable distance.
Reliable control: The receiver only works with the transmitter which use same code. One/several transmitters can control one/several receivers simultaneously.